Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
How to adjust brake and clutch pedal sensors
- Merlin
- Moderator
- Posts: 12294
- Joined: Fri Aug 06, 2010 9:04 am
- My Generation: 5G
- PSN GamerTag: Merlinbadman
- Location: Edinburgh
- Has thanked: 29 times
- Been thanked: 191 times
How to adjust brake and clutch pedal sensors
I had to adust my brake pedal sensor to cure a crusie control problem.
On both pedals there is a sensor.
1. Disconnect the sensor wiring.
2. Use a 14mm spanner to slacken the nut.
3. Rotate the senor to get it to the desired position, tighten the nut and reconnect the wiring.
On both pedals there is a sensor.
1. Disconnect the sensor wiring.
2. Use a 14mm spanner to slacken the nut.
3. Rotate the senor to get it to the desired position, tighten the nut and reconnect the wiring.
- Sailor
- Supporter 2016
- Posts: 3272
- Joined: Tue Jul 17, 2012 7:36 pm
- My Generation: 0G
- Location: Hampshire
- Has thanked: 54 times
- Been thanked: 113 times
- Contact:
I'm surprised you have to disconnect the plug. Is the system smart enough to reset on re-connection or something?
Mind you, I didn't know these sensors existed: I'd never thought about them. It makes sense: use the pedals and the cruise control switches off. Is it just an in-line micro-switch?
Mind you, I didn't know these sensors existed: I'd never thought about them. It makes sense: use the pedals and the cruise control switches off. Is it just an in-line micro-switch?
International Pensioner of Mystery
- JDM-BB4
- Posts: 667
- Joined: Mon Jan 30, 2012 1:03 am
- My Generation: 4G
- PSN GamerTag: JDM-BB4
- Location: Stirling, Scotland
This gives me somewhere to start as I discovered the cc on the 5th gen isn't working.
Is the button on the rhs of the dash supposed to light up or stay depressed when pushed before setting the speed? Mine does neither.
Is the button on the rhs of the dash supposed to light up or stay depressed when pushed before setting the speed? Mine does neither.
Prelude history: black bb4, silver bb4, green bb8, project eX, JRSC 5th gen Motegi.
Current rides: Honda s2000 GT & Honda Accord type R Honda Civic FD2 Type R !!
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21230
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 1983 times
- Been thanked: 240 times
- NCCMUR
- Posts: 600
- Joined: Sun Jan 29, 2012 10:14 am
- My Generation: 5G
- XBOX GamerTag: NCCMUR
- Location: Stirling,Scotland
- Has thanked: 1 time
The cc master switch stays depressed and lights up
then set as normal
i had to adjust the switch on the clutch pedal to get mine working
exactly the same procedure as merlins guide
then set as normal
i had to adjust the switch on the clutch pedal to get mine working
exactly the same procedure as merlins guide
bristol_bb4 wrote: turn the volume up and get your happy time tissues ready
Kevin Bridges wrote: How did a didnae!!
NCCMUR's 1997 VTI