Posted: Mon Mar 16, 2015 12:26 pm
Yep.
Page 25 of 29
Posted: Mon Mar 16, 2015 1:31 pm
Top tip there i have mine to do aswell
Posted: Mon Mar 16, 2015 6:28 pm
mine stuck in place with just oil? Re: Merlin's 2.2 VTi H22a8
Posted: Fri Mar 27, 2015 1:18 pm
It took a week to burn off all the oil that was sprayed everywhere by the split o-ring and the stuff I spilt when changing it over. A few days after swapping it over me and Vanzep went for a blast in our cars and I had white oil smoke escaping from my front wheel wells but there was no oil on the ground under the car.
All is good now though as it has all burnt off and no longer stinks. But I have something squeaking and rattling on the rear of the car so going to have to sort that now
All is good now though as it has all burnt off and no longer stinks. But I have something squeaking and rattling on the rear of the car so going to have to sort that now
Re: Merlin's 2.2 VTi H22a8
Posted: Mon May 11, 2015 1:14 pm
New Delphi rear anti rollbar drop links. The current ones are rattly 
. Awesome value at £30 delivered for the pair 
. Awesome value at £30 delivered for the pair Posted: Mon May 11, 2015 3:01 pm
Not bad price! Hope it sorts the rattling 
Posted: Mon May 11, 2015 8:36 pm
Nice buy at that price.
Where did you get them from?
Where did you get them from?
Re: Merlin's 2.2 VTi H22a8
Posted: Tue May 12, 2015 9:05 am
Ebay 
Last night didn't go to plan
The OEM drop links were rusted solid, no chance of getting them off as the OEM ones dont have a bit on the rear to hold it with a spanner like the Delphi ones do. The nut was rounding. We were going to take the angle grinder to it but I noticed that my fuel tank drain bolt was leaking. It seems that one side of the rear of my car is sitting lower than the other side, probably the reason why the car feels like the wheels are out of alignment. And to top it off my key decided it doesn't want to work properly any longer. It is so worn that it is difficult to start the car, although I just swapped it for my spare key.
Last night didn't go to plan
The OEM drop links were rusted solid, no chance of getting them off as the OEM ones dont have a bit on the rear to hold it with a spanner like the Delphi ones do. The nut was rounding. We were going to take the angle grinder to it but I noticed that my fuel tank drain bolt was leaking. It seems that one side of the rear of my car is sitting lower than the other side, probably the reason why the car feels like the wheels are out of alignment. And to top it off my key decided it doesn't want to work properly any longer. It is so worn that it is difficult to start the car, although I just swapped it for my spare key.Posted: Tue May 12, 2015 9:11 am
What's causing it to sit lower? Twisted arb? Suspension not adjusted equally?
I thought oem lude drop links had an Allen key hole in the end of the balljoint, so you could hold it steady while undoing the nut?
I thought oem lude drop links had an Allen key hole in the end of the balljoint, so you could hold it steady while undoing the nut?Re: Merlin's 2.2 VTi H22a8
Posted: Tue May 12, 2015 9:17 am
No idea what is going on. I'll have more time at the weekend to investigate further. Yeah the OEM links do have the Allen key hole on it but the threaded rod and nut are so rusted that it isn't strong enough to allow me to get it off. They are more than likely the ones fitted in the factory so are very old. Angle grinder!