Lude Generation

Hi guys i am having a problem with alb. As i start to drive, my abs pomp under the hood starts to buzz and after couple minutes it stops and ALB light comes on. I was trying to see the code and it blinks 3 times. Well any help would be appreciated

Found some useful information here:

http://prelude3g.com/p3g/documentation/ ... lbcode.htm

it's likely if you watch the flash codes there are further codes which will help narrow down the issue.

3rd gen owners can comment further, but reading similar old honda ABS issues, it sounds like the ECU runs the motor to check for a build in pressure. Failed O rings stop the pressure building, so pump over-runs, then gives up and throws a code.

Is it possible you only have code 1 repeated 3 times?

Hi again it looks like it's a code 1 as after removing fuses it blinks just once

It looks like I will have to bleed the alb high pressure fluid and I will need a ABS T Wrench, that can't find to buy