After my engine bay fire, I could only find an F20 engine loom for sale, it fitted perfectly to the engine harness plugs near the fuel filter, I only had to add a vtec wire to make it all work.
Remove all the working you've done in the cabin and start looking at the wiring to the engine harness area.
P11 ecu pinout
-
- Posts: 26
- Joined: Mon Oct 26, 2020 2:48 pm
- My Generation: 4G
- Location: Morpeth, nth.umberland
- Has thanked: 8 times
- Been thanked: 8 times
- Contact:
P11 ecu pinout
Thanks a lot lads, I will study the info you sent me, and I will publish my findings , i'm sure it will help future bb3 uk luders for a swap
Never drive faster than your guardian angel can fly
-
- Posts: 26
- Joined: Mon Oct 26, 2020 2:48 pm
- My Generation: 4G
- Location: Morpeth, nth.umberland
- Has thanked: 8 times
- Been thanked: 8 times
- Contact:
P11 ecu pinout
Thanks Vtecmec, my original engine harness fits the H22 all plugs fitted (some a bit tight around the dizzy and alternator) I did have a H22 engine harness but it was so butchered by the breaker yard Uggs. they cut through the the alternator harness and aircon pump harness. In the end I stripped out the cables of the H22 and kept all the plugs and connectors, if anyone needs one let me know.
Never drive faster than your guardian angel can fly